How to Replace the Water Filter of China Refrigerator Suppliers

• Posted by bai ling 9 November 2021 - Filed in Technology - #China Refrigerator Manufacturer  #China Refrigerator  #China Refrigerator Suppliers  - 33 views

   

  How often should I replace the water filter?
  The manufacturer recommends replacing the water filter every six months, depending on the level of impurities in the water and the amount of water used by ordinary households. Of course, the situation varies from person to person. Compared with a large family using hard water, a single person using soft water needs to replace the filter much less frequently. In addition, if you use filtered water for pets, plants, or any other purpose, this will also shorten the life of the filter.

  Although some refrigerators from China Refrigerator Suppliers have an indicator to help you know when you need to replace the filter, many refrigerators do not, so it is important to set a schedule. Stale water or ice in the dispenser is usually a clear indication that your filter needs to be replaced. After replacement, check the filter for signs of mineral accumulation. If you find any problems, please consider improving your daily work.

  Replace the refrigerator's water filter
  First, find your water filter. For practical purposes, the design of the refrigerator tends to be uniform, but there may be some differences. Your water filter may be located in the front refrigerator compartment or the bottom grille.
  Next, check the locking mechanism. There are two main designs.

  Twist lock
  Most refrigerators use a basic twist-lock system to remove or install the water filter. Just turn counterclockwise and pull to remove. Replace the water filter and turn it clockwise until it locks.

  Button
  Whirlpool and KitchenAid base grille designs are very common, just press the button next to the filter to release it. Pull out the filter and remove the reusable colored keycaps (do not throw away). Screw the cap onto the new filter, replace the old filter, and then push until you hear a click. Newer models may not use the cover.

  How to replace the refrigerator filter
  Final suggestions and common mistakes
  After installing the new water filter, dispense approximately 2-3 gallons of water to flush the filter. If your refrigerator has a filter replacement indicator, be sure to reset the indicator at this time.

  Before installing the filter, remove all protective caps. If you have a base grille filter with a knob, do not throw away the reusable knob when replacing the old filter.
  For more product related information, please click: China Ice Cream Freezer Suppliers