Introduce The Cooling Process Of The DC Freezer

  • Most of the refrigerators used in our homes and major shopping malls are AC refrigerators, and due to some special circumstances, we may need to use a DC freezer . At this time, we use direct current.

    The dry saturated gas of the DC freezer refrigerant is compressed into high temperature and high pressure superheated refrigerant vapor when passing through the compressor, and enters the condenser through the exhaust pipe of the expansion valve piston of the compressor, and the high temperature and high-pressure refrigerant vapor is condensed The liquid is condensed into a high-pressure and low-temperature liquid. After this liquid enters the refrigerator filter, it passes through the capillaries and becomes a low-temperature and low-pressure refrigerant vapor with moderate enthalpy throttling in the capillaries. A large amount of boiling in the isobaric evaporator absorbs external heat and becomes saturated steam, which realizes the refrigeration process of the refrigerator, and finally, the refrigerant is sucked in by the compressor to perform the cooling cycle again.

    In some cases, the freezer space we use is not large enough, so we have the big size freezer again, which saves a lot of attention, and the space is large enough.