What should I pay attention to when making air cooler mould?

• Posted by xiu umin 26 November 2020 - Filed in Other - #Air Cooler Mould  - 42 views

  Taizhou Huangyan Rongwei Plastic Mould Co., Ltd. is located in Huangyan, the hometown of moulds in China. We have the most advanced mold manufacturing equipment and the most qualified trained employees, air cooler mould is one of our main products.

  Mold cooling system design:

  The design of the cooling system is a relatively complicated task, that is, the cooling effect and uniformity of the cooling must be considered, and the influence of the cooling system on the overall structure of the mold must be considered. The specific location and size of the cooling system are determined; key parts such as the movable mold Or cooling of inserts; cooling of side sliders and side cores; design of cooling elements and selection of cooling standard elements. Our company began to analyze these series of problems during mold design. The mold uses circulating water to flow in every part of the mold to reduce the cooling time during injection molding, improve product production efficiency, and greatly reduce production costs.

  When mold design and processing:

  General plastic mold materials such as storage boxes and other assembly aspects: the main body and the bottom cover are best assembled in the form of double buckles, that is, the bottom shell of the product has dual cards, and the upper shell is directly inserted, so that it is not easy to misalign, and the product assembly gap is uniform. The craft seam is best to be 0.5mm worse. The most feared thing for general plastic products is the miniature. The screws and ribs under the product are most prone to miniatures. The best way is to reduce the wall thickness around the screw posts by 0.8-1 MM, followed by For top white, top white, generally lighting and demolding inclination, the demolding inclination of PP material products must be at least 1 degree, and the ejector pin should be designed around the product (where the force is better). When mold processing: we will follow up the mold report, and after the mold material is purchased, I will send you the picture. After the original processing is completed, I will send the picture to you, and then report to you when the mold is assembled, and then follow you Samples are sent, I will let you see our process throughout the process.

  If you are very interested in our company, please click on the link for more information: dustbin mould manufacturer.