Now many people choose to buy curtains online, not only the price is cheap but also the variety of styles, but this means that we need to hang the curtains ourselves. Below, Linen Look Blackout Fabric Company introduces different ways to hang curtain hooks:
- Wearing method of large pleats: It is recommended to wear according to 1, 3, 8, and 9, that is, the 4 pins of the four-tooth hook are inserted into the serial number 1389 holes on the cloth tape respectively, and there are 4 holes in the middle, and the third one is worn. Fork; 6-8 holes between hooks. This way the pleats of the curtains look a bit like butterflies. There are also pillar style, Korean style, and South Korean style. No matter which way you wear it, the hook is worn to the top of the cloth After the eyelid with holes, use your fingers to tidy up the hooked place, and push the folds so that they face the front, which will look good.
- Small pleat threading method: The 4 pins of the four-tooth hook are inserted into the holes marked with the serial numbers 1, 2, 3, and 4 on the tape respectively, and the third fork is worn without space in the middle; the space between the two hooks 3-4 holes.
- Middle pleat threading method: The 4 prongs of the four-tooth hook are inserted into the serial number 1, 2, 4, and 5 holes marked on the cloth tape respectively, and there is a hole in the middle, and the third fork is worn; Spaced 4-6 holes, generally 7-8 hooks per meter.
The distance between the hooks should be as uniform as possible, and it should be calculated first; if there are rusted hooks, replace them immediately, otherwise they will pollute the curtain fabric; in actual use, you can adjust the number of pins inserted into the slot, or 3 or 4; you can Adjust the number of lanyard slots spaced between each two hooks, allowing you to adjust the effective width of the curtain.
Through the above introduction, China Polyester Velour Fabric Factory hopes that you can simply refer to the content of this article in future use.