China Non Spill Lotion Pump Manufacturers Introduce The Parts O

• Posted by jiemingspray yuyao 13 February 2022 - Filed in Other - #Non Spill Lotion Pump  - 29 views

   

  China Non Spill Lotion Pump Manufacturers introduce the construction of the sprayer:

  1. The air chamber is located on the outside of the liquid medicine barrel. The bottom of the air chamber is connected with the water outlet valve and the water outlet joint, and there are thread buttons at the connection. The upper part of the air chamber is marked with a safety water level line. The function of the air chamber is to hold the air inside, which can stabilize the pressure, ensure the uniform and continuous spraying of the liquid medicine, and at the same time play a buffering role to prevent damage to the parts. There is a water outlet joint at the lower part of the air chamber barrel, which is connected to the spray part pieces.

  2. The liquid medicine bucket The medicine liquid bucket is composed of a water cover, a bucket body, a strap outside the bucket, a sling, a saddle, etc. After the water-filling cover is covered, the seams are tight, which can prevent the liquid from splashing, and there is a ventilation hole in the center of the cover to ensure that the barrel is connected to the atmosphere.
  Spraying parts The spraying parts are composed of hoses, straight-through switches, casings, nozzles, nozzles, etc. The through switch is composed of a switch core and a switch shell, and its opening or closing controls the flow or stop of the liquid medicine. A filter screen is installed in the casing to filter the sprayed liquid medicine. The nozzle is used to connect the casing and the nozzle. The nozzle consists of a nozzle body, a gasket, a nozzle and a nozzle cap for spraying For atomizing liquid medicine.

  Through the above introduction, Non Spill Lotion Pump Manufacturers hopes that you can simply refer to the content of this article in future use.