NPT Thread Fittings Suppliers Introduces The Use Of Transition
-
Transition joints are used to connect different pipes, but as they are more widely used, there are more and more types of transition joints, such as copper and aluminum in materials, and hydraulic joints in function, the same there are four This is a common form. Below, NPT Thread Fittings Suppliers introduces four connection methods of transition joints:
1. The corner bend type has the same name as its name. This transition joint is to make the front part into such a right angle, which can be connected to two pipes on different planes, such as the water pipes in the corners and other places often because we need to use them Transition joints in this way. The vertical water pipe can be unfolded horizontally, saving space and making it more convenient.
2. Straight-through type This is the most common and simplest type of joint. It is similar to a pipe, connecting the two ends that are not connected, but it is still in a horizontal state.
3. The three-way joint has three joints with different development directions, which can connect pipes from three research directions of the society. Generally, these three directions are perpendicular to each other, like a corner. It is also widely used in life.
4. Four-way type, this model is not only a three-way joint, it is like cross-connecting four different directions. In life, products in four different directions can be linked together, giving full play to the function of transition joints connecting products.
Through the above introduction, Hollow Hex Plug Manufacturers hopes that you can simply refer to the content of this article in future use.