Hose Fittings Wholesalers Introduces Leak Handling Details For
-
Hose Fittings Wholesalers explains why the fittings leak and fall off?
There are two main reasons. One is caused by the deterioration of the hose. The second is caused by improper selection of joints and hoses. The hose is flexible at the beginning of use, and this flexibility makes the connection between the hose and the joint tight to a certain extent, which can effectively prevent fluid leakage.
When installing the joint on the hose, if a pipe joint (hose port) larger than the inner diameter of the hose is inserted, the stretched hose will generate a strong restoring force, so it can be tightly wrapped connector.
However, after a long time of use, the hose hardens, and the elasticity of the hose itself gradually disappears, resulting in a gap, and the fluid leaks from the gap between the hose and the joint. This phenomenon also occurs between the outer tube of the hose and the hose clamp, so no matter how perfect the initial installation is, the phenomenon of "falling off and leaking" will still occur over time.
Therefore, the user must accurately predict the period when the elasticity of the hose becomes weak, and regularly perform maintenance work such as tightening the hose clamp. The second reason is leakage and shedding caused by improper size selection of hoses and joints. Even products of the same name from the same manufacturer come in multiple sizes. If it is too loose, it will naturally leak and fall off immediately. on the contrary,When the connection is too tight, it puts excessive pressure and burden on the hose, which promotes the deterioration of the hose, and also accelerates the rate of leakage and detachment of the hose.
Through the above introduction, Hydraulic Fittings Wholesaler hopes that you can simply refer to the content of this article in future use.