3D Embossed Fabric Factory Introduces The Knowledge Of Three-di

• Posted by haiwei home 15 December 2021 - Filed in Other - #Printing Fabric  #3D Embossed Fabric  - 27 views

   

  3D Embossed Fabric Factory introduces the requirements of the three-dimensional printing embossing process:

  1. Design printing paper pictures and make printing embossing rollers;

  2. Unfold the cloth through the open-width equipment;

  3. Heat the printing embossing roller, and at the same time set cooling rollers separately above and below the printing embossing roller, so that the surface temperature of the printing embossing roller is 180-260℃;

  4. Feed the printed paper and cloth at the same time for printing and embossing;

  5. Separate the printed paper from the embossed cloth and collect the material.

  The embossing roller includes an inner cylinder and an outer cylinder sleeved outside the inner cylinder, and the inner cylinder and the outer cylinder are sealed by a seal. The seal is provided with an oil inlet and an oil outlet. The oil inlet and the oil outlet are separately connected with a container storing hot oil. The temperature of the hot oil is 250-280°C.

  Through the above introduction, Printing Fabric Wholesaler hopes that you can simply refer to the content of this article in future use.