Introduction To The Use Of Flat Screen Printing Machine Factory

• Posted by licheng flatprinter 24 August 2021 - Filed in Business - #open rotary printer  #Flat Screen Printing Machine Factory  - 28 views

  What factors should be paid attention to in the operation of the stenter setting machine?

  The open rotary printer will have its own operating standards in the actual operation process, but from the current situation, in order to ensure their better normal operation, as any user in the actual operation process, there are many The elements of this are to be paid special attention to.

  
  (1) Running tension

  Under normal circumstances, during the operation of the stenter setting machine, its operating tension must be considered. All equipment and devices basically require lower tension to operate, such as a comprehensive qualitative analysis of all fabrics. Processing, and there are other installation or rolling methods on this, all installation procedures and the tension of the fabric must be treated comprehensively, some devices should be used reasonably, and each device should be carefully checked. To ensure the final tension, it is necessary to make a comprehensive adjustment in this.

  (2) Overweight control

  In the process of daily use of the stenter setting machine, in order to ensure the uniformity of the coil structure in the whole place, it is necessary to prevent deformation, in which the amount of overposition must be effectively controlled. Basically, it is kept between 20% and 40%, because if the braid is dried or shaped, it will be in a relaxed state. This process will be able to better eliminate the residual tension and reduce the remaining Shrinkage.

  (3) Critical water content

  The element of licheng Flat Screen Printing Machine Factory is also considered during the running process of the entire stenter setting machine. After all, the moisture content of the parts is very important. It is more appropriate for them to choose a steam engine, so this can guarantee weaving The moisture content of the vertical and horizontal sections of the object is relatively uniform.