A Wide Variety Of Ignition Coil And Distributor

• Posted by qiche jiacheng 11 May 2022 - Filed in Business - #ignition coil and distributor  #nano ignition coil  - 18 views

   

  The ignition coil and distributor is one of a wide variety of induction components, but what do we know about induction coils? I believe that most people know little about inductor coils. It can be said that the inductor coil is the most important part of the inductor product, and the composition of the inductor coil is also wound according to the inductor product.
  Common coil inductor coils, their advertising creative design is not a vertical rotation, but a certain angle frame line type. This type of coil is called a honeycomb coil. The back and forth bending frequency of the cable during one revolution is often referred to as the sheet metal bend rating. It is characterized by small size, small distributed capacitance and large magnetic induction capacity, which can be used for honeycomb windings. The honeycomb coil adopts the coil inductance of the honeycomb coil winding machine. The larger the inflection point, the smaller the distributed capacitance.
  The induced charge L represents the characteristic of the coil and is independent of the precise measurement of the total current. Except for the special magnetic induction coil (color-coded magnetic induction coil), the magnetic induction coil on the general coil has no professional logo, only the name of the technical professional.
  Sensitive to XL antigen. The specification and model that the induction coil plays an insulating role in the AC circuit is called the inductive reactance XL, and the enterprise is called the ohm. The relationship between the inductance L and the AC frequency f is XL=2πfL.
  The quality factor Q is a scalar that describes the quality of the coil, Q is the resistance, and Q is the resistance, that is, Q=XL/R. In the control loop, the higher the Q value of the coil, the smaller the loss; the Q value is related to the accurate measurement of resistance, dielectric loss of the wire frame, loss caused by shielding or transformer coil, damage from high frequency skin effect, etc. and other factors. The Q value of the coil fan is generally between tens to hundreds.
  Power distribution capacitors. There are low-voltage capacitors between coil turns, between the coil and the shielding layer, and between the coil and the bottom plate, which are called distribution capacitors. The existence of distributed power capacitors promotes the reduction of coil Q value and high efficiency, so the lower the distributed power capacitors, the better the nano ignition coil.