The operation of the Freeze Dry Machine is started
1, to determine whether the power supply voltage is correct, leakage switch is installed, grounding fortifications have been done?
- Is the automatic drainer/drain properly installed and will the drain be drained to the machine?
3, water-cooled please start the cooling tower and open the cooling water valve.
- If there is a power lamp (POWERON,VOLTAGEON), press the start button (ON,START) after the power lamp is on to start the machine. If there is no power lamp set, the machine can be started directly in the switch direction.
- After startup, the RUNNING lamp will be on until shutdown or the abnormal lamp (FAULT,OVERLOAD) will be on and the running lamp will be off.
- After starting, the compressor will keep running continuously and the running lamp will be on, but the air-cooled heat dissipation motor will run or stop due to the low light load (Note: some models of heat dissipation motors are designed to not stop).
- After 30 -60 minutes of operation, the automatic drainer will start to accumulate water and drain.
- Please keep the Vegetable Drying Machinein continuous use and do not connect with the control circuit of the air compressor to stop the repeated operation of the vegetable drying equipment, or manually turn it on and off repeatedly.
- Please refer to troubleshooting or contact our company if the abnormal light is on or other abnormal phenomena occur.
Stop running
1, under normal circumstances to stop the operation of the air compressor.
- Press the stop button (OFF,STOP) on the vegetable drying equipment to turn off or turn off the machine in the direction (0) of the attached light switch.
3, cut off the power supply of vegetable drying equipment, there is a power lamp to pay attention to whether it goes out.
4, water-cooled cooling tower, water pump must be determined whether to shut down.
Start again
1, restart the vegetable drying equipment must be stopped after five minutes to start again, otherwise will start failure or even abnormal instructions or phenomenon.
- For the remaining steps, please follow the launch procedure.